Gas-Safe boiler installation, MCS-grade (via partner) air source heat pumps, full bathroom refits and scheduled heating work for homeowners and landlords across Stockton-on-Tees, Teesside. 30+ years on the tools, fixed prices, one accountable team.
Gas-Safe registered · MCS-grade (via partner) · 12-month workmanship guarantee
~20 minutes from our Darlington base. That means real same-day cover, fast surveys, and engineers who already know the housing stock on your street.
Stockton-on-Tees has been a core Greencore service area for years. We cover the full borough — central Stockton (TS18, TS19), Norton, Billingham, Thornaby, Eaglescliffe and Yarm. It's a 20-minute run from our Darlington base, which means same-day response times for most emergencies and tight scheduling for planned installs. The mix of established Victorian housing, suburban semis and high-spec executive stock in Yarm means we routinely move between two very different worlds of plumbing — and the experience matters.
Stockton's stock runs from Victorian terraces near the town centre and Norton, through inter-war and post-war semis in Billingham and Hartburn, to executive detached housing around Yarm, Eaglescliffe and Wynyard. Yarm in particular has a high proportion of larger properties with system boilers, unvented cylinders and underfloor heating — work that needs proper hydraulic balancing rather than a quick combi swap.
The most common Stockton jobs are A-rated combi and system boiler replacements, underfloor heating installs in Yarm and Wynyard extensions, full bathroom refits, BUS-grant air source heat pumps in the newer detached stock, and landlord CP12s across the rented housing in central Stockton and Thornaby.
Everything below is delivered by the same in-house team — one accountable engineer from survey to commissioning.
A-rated combi, system & heat-only installs typically completed in a day, plus annual services that protect your manufacturer warranty.
Learn moreLandlord CP12 certificates, homebuyer gas checks and full appliance inspections by Gas-Safe registered engineers.
Learn moreMCS-grade (via partner) heat pump design and installation delivered through our accredited MCS partner installer.
Learn moreWet and electric underfloor systems sized for the room, screed type and floor finish — no cold spots, no hotspots.
Learn moreMagnetic power-flushing, diagnostics and full system repairs that restore radiator output and quiet noisy boilers.
Learn moreSolar thermal, heat-pump and hybrid systems engineered to lower running costs without compromising hot-water performance.
Learn moreHETAS-registered stove and flue installs, twin-wall systems, hearths and CO testing — signed-off and Building-Control notified.
Learn moreFull bathroom design and fit-out — plumbing, tiling, electrics and joinery managed by one accountable team.
Learn moreFully-tanked wet rooms with proper falls and linear drainage — built to last, not just look good on day one.
Learn moreEvery job in Stockton-on-Tees is delivered by Stephen and the in-house team. The engineer who quotes is the engineer who commissions — there's no handover gap where standards slip.
We survey properly before we quote. Anything we spot — a tired gas run, an undersized cold main, a dodgy isolation valve — is priced upfront so the number on the invoice matches the number on the quote.
As Worcester, Vaillant and Ideal accredited installers we can register boilers for 10–12 year warranties on the spot. For heat pumps we register the MCS certificate so you keep your BUS grant and any future incentives intact.
Dust sheets down, shoes off, tools tidied at the end of the day. We work in people's homes across Stockton-on-Tees every week and we treat them accordingly.
Heating and plumbing problems in Stockton-on-Tees aren't random — they cluster around the property stock, the water hardness in the area, and how previous installers cut corners. Knowing what to look for before we even open the boiler casing means we fix the cause, not just the symptom.
Larger Yarm extensions often run wet underfloor in the kitchen and rads upstairs from the same boiler. When the hydraulic separation is wrong, one circuit starves the other. We rebalance with proper manifolds, mixers and a low-loss header where needed.
Stockton and Yarm have a high proportion of unvented systems. Faulty expansion vessels and dribbling tundishes are a regular issue — we fix the cause (failed PRV, gas-charge loss) rather than just topping the system up.
Many properties in Stockton-on-Tees still have steel radiators on systems that have never been chemically cleaned. Black magnetite sludge collects in the coolest legs of the circuit, cold spots appear at the bottom of radiators, and the boiler short-cycles trying to push heat through restricted pipework. A proper magnetic power-flush plus a filter solves it permanently.
Older 15mm gas runs were sized for 60–80kBtu back boilers, not modern 30kW combis. We regularly find pressure drops under load that make boilers lock out intermittently. We pressure-test the supply on every quote and upgrade to 22mm where the calculation demands it.
Larger detached homes need a different conversation. A 24kW combi will not keep up with two en-suites running simultaneously; a properly sized system boiler with a 250–300L unvented cylinder will. We model the simultaneous-use load on every Yarm survey so the system spec matches how the family actually uses the house.
Notifiable gas and heating work in Stockton-on-Tees is self-certified through Gas Safe (boilers, gas) and MCS (heat pumps, solar). That paperwork is filed automatically and you get the certificate posted to you — no separate Building Control submission, no extra fee, no chasing.
10-minute call to understand the property, the problem and your timeline. Honest answer about whether we're the right fit.
We visit, measure, pressure-test gas, check the mains, look at flue routes and document what we find — usually within the same week.
Itemised, written, valid for 30 days. Nothing changes on the invoice unless you change the brief.
Booked into the calendar, materials on the van, in and out cleanly to the agreed schedule. Dust sheets, shoes off, tools tidied each day.
Tested, balanced, documented. Warranty registered, certificates issued, customer walk-through before we leave.
Can't see your question? Call 07789 505532.
One survey, one written number, one accountable engineer from start to finish. Most quotes returned inside 48 hours.
Gas-Safe registered (932261) · MCS · HETAS · Fully insured (£5m public liability) · 12-month workmanship guarantee
